(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. 6

    IMCO 7 foot HD rear blade

    Thanks....i decided I am going to grab it tomorrow morning. Seller seems to be honest and sent me some additional photos. Could use a bit of surface rust removal, flip the cutting edge, and a paint job. Thanks for the help!
  2. 6

    IMCO 7 foot HD rear blade

    Yep....thanks....I am waiting on some additional photos from the seller. Wondering how bad the cutting edge is, if there is excessive slop in the pivot, and if there are any areas that are rusted through or about to rust through.
  3. 6

    IMCO 7 foot HD rear blade

    Thanks for the replies. To answer a few questions....yes I have googled IMCO and didn't find much info on them. There are a few implements posted on fastline but nothing exactly like this blade. One blade in Ohio looks similar for $700.00. Blade will be mounted on a massey ferguson...
  4. 6

    IMCO 7 foot HD rear blade

    I have my eye on what appears to be a very heavy duty rear blade that I am thinking of buying. The seller says it is made by "independent manufacturing co". It has 4 way manual tilt and angle. CAT 2 pins. It seems like anything bigger than a 6 footer is rare around my area. Heavy duty...
  5. 6

    Front Tires? Brands, sizes etc.

    Thanks PT.... Speaking of wheels/tires. I assume the proper color for the wheels on my 255 is "Silver Mist". Is this correct? The engine, chassis and other gray parts are "Flint gray Metallic"? Does anyone know where I can get rattle cans of Silver mist Metallic. Preferably...
  6. 6

    Front Tires? Brands, sizes etc.

    So you got me thinking so I figured I would do a comparison. Hoping that I didn't make a mistake. As I mentioned I ordered 7.5-16's for the front and my current tires are 6.5-16. Here is a comparison via the manufatcure's wesite Original Tires: Firestone Champion Guide Grip 6.5-16...
  7. 6

    Front Tires? Brands, sizes etc.

    Thanks.....unfortunately I have already ordered new 5.5x16 wheels and 7.5-16 titan 4 rib tires. I hope they work. The tractor has 16.9-28 on the rear. Hope I didn't make a mistake as everything had to be ordered on the internet. I should have waited for more suggestions but I...
  8. 6

    Front Tires? Brands, sizes etc.

    My 255 is in desperate need of new front tires. Currently, it is wearing well rotted and bald Firestone Tri-ribs 6.5-16. Is there any reason why I couldn't move to a 7.5-16 in a 4 rib pattern? No loader on the tractor. I have been reading/researching and many say that the thinner...
  9. 6

    Fuel filter issues and other issues.. PTFarmer, Dieseltech

    Awesome. Thanks for all the help!. That is what ibwill do for now. My next thread will ber about front tires!. Thanks to both of you for be ing so helpful over the last few weeks. I appreciate it greatly.
  10. 6

    Fuel filter issues and other issues.. PTFarmer, Dieseltech

    Thanks dieseltech. I really appreciate it. I am a bit stressed out about this hydraulic issue. After I removed all the gunk from the valve/manifold and took it off the tractor trying to fix the leaks, it is now worse. I just want to eliminate the dumb valve and outlets. Maybe I can...
  11. 6

    Fuel filter issues and other issues.. PTFarmer, Dieseltech

    Thank you dieseltech. Last question. The jumper hose seems simple enough to have made up. Could I not run a hose from the outlet on the on plate to the inlet on the filter and the from the outlet on the filter back to the plate on the side of the tractor? Or am I not understanding how...
  12. 6

    Fuel filter issues and other issues.. PTFarmer, Dieseltech

    I will do that. Thank you sir. Anyone else? I could really use some help deleting the aux hydraulics. The jumper that Dieseltech suggested sounds fine, I am just not sure I am understanding it correctly. I would still like to use the hydraulic filter....just not sure if that is...
  13. 6

    Fuel filter issues and other issues.. PTFarmer, Dieseltech

    Ok...so I took a real good look at the old banjo bolt again and found the the hole you were speaking of dieseltech. It is a pinhole. I was looking for something the size of what is seen on the new screw in the photos above. My mistake. Can you explain more about connecting the two...
  14. 6

    Fuel filter issues and other issues.. PTFarmer, Dieseltech

    Thank you PT... Looks like the original bolt is just an M10 Banjo bolt. I am just wondering why in the heck mine has no hole. Unless it is clogged and is super hard to see.. I don't get it. I will probably just repair the line as you suggested. I tried to find a replacement line with...
  15. 6

    Fuel filter issues and other issues.. PTFarmer, Dieseltech

    Here are some more photos. The original banjo bolt does not have a clogged hole in the side but is hollow....I don't get it. The other photos show how the aux hydraulics are plumbed. And the fuel line#9 That has a gouge. Not sure why my photos are flipped. Sorry about that.
  16. 6

    Fuel filter issues and other issues.. PTFarmer, Dieseltech

    Hi PT. Not sure how I would get by without you guys!! Thanks. I don't believe the the Leak off line that you mentioned is my issue. The leaky line is #9 picture below (photo cut from a previous thread that you were helping me on) I am not sure what you mean about the spool valves...
  17. 6

    Fuel filter issues and other issues.. PTFarmer, Dieseltech

    Thanks Dieseltech. I will take a look at the original Banjo bolt and see if there is a clogged hole. The only odd thing is before i tore into the fuel lines and filter, the tractor ran fine with that hole-less bolt installed in the original filter head with the filter and glass bowl. The...
  18. 6

    Fuel filter issues and other issues.. PTFarmer, Dieseltech

    Good morning. I am new to diesels so bare with me. I have been working on a MF 255 with 4.236 Perkins lately. Finally got the Aux hydraulic system back together, changed all the filters, and all the fluids. Started the tractor for the first time last night since I started tearing it...
  19. 6

    Massey 255 questions

    Thanks!. I will probaably just buy a heavy cable. The negative is grounded with a mesh looking thing. Any suggestions on size of battery. I live in MI and it gets pretty cold here.
  20. 6

    Massey 255 questions

    Sorry....I am full of questions. So my 255 has 2 batteries up front behind the grill. Is there any issues with converting the two battery system to a one battery and putting it in the space under the steering wheel? Mine has 2 850 CCA batteries. Can I run one 1000 instead? Moving...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top