(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. T

    My 8N

    Disengage the PTO before trying to release the clutch and feather the clutch in, dont dump it. Bring it right to the edge of stalling and reapply, do that two or three times, and in my experience this warms it up just enough to knock it off. You can mitigate this issue by changing to UTF as...
  2. T

    2N Hydraulic Pump Chatter

    I’m also wondering what the local temps are like. I use 90wt in my 8N because it doesn’t do any winter work, but it’ll absolutely chatter for the first 15-30 minutes of operation if it’s below freezing (I park outside) despite being otherwise 100% functional.
  3. T

    8n front engine knock

    3x on checking the exhaust manifold. I blew the gasket in mine (suspect a prior owner never totally tightened the nuts as it came off waaaaay too easily) around the top corners of #1 and #4 and it sounded very, very much like a knock. Well, before it started huffing and blowing exhaust at my...
  4. T

    Cold weather stalling of 8N

    Just as a reaffirmation of Bruce’s excellent advice, my ‘49 8N needs a modest carb adjustment every winter or it gives me trouble, which must then be reversed every spring as it warms back up. I forget every year, have to play the “choke dance,” and then remember to turn the main screw after...
  5. T

    What camp are you in?

    As others have said, it’s your tractor, you do you. In my case, it’s all about functionality. This is my only tractor and it needs to work for its supper. It’s 12V because I need to use a 12V sprayer. It’s got mismatched paint because paint is paint, so long as it isn’t rust, and some...
  6. T

    FNG... intro and 8N

    Just out of curiosity, where did you get that ROPS?
  7. T

    BassAckwards 9N???

    I think I see the cause. Notice the numbers on the house are mirrored? They took the picture on a phone that’s reversing the pictures. So left is right, and right is left. It’s a mirrored image.
  8. T

    Resistors burn out on Ford8N

    I’ve been bit by the shorting out new resistor screws issue, myself.
  9. T

    Exhaust Manifold FO-4?

    Good news! All four nuts came off with almost no effort. Oddly, three were wider than normal, but the ID was the same. Made it hard to get a socket in the small space the nuts hide in, if I?m honest. Not sure if those were ?heavy duty? or what, but I replaced them with OEM nuts and put...
  10. T

    Exhaust Manifold FO-4?

    Thank you!
  11. T

    Exhaust Manifold FO-4?

    Um...are the exhaust/intake manifold remove and reinstall instructions omitted from the FO- 4 manual, or am I just having a bad reading day? I apologize if this has come up before, I had trouble finding the torque specs and mine needs replacement.
  12. T

    How much gas

    I?ve gotten results almost exactly consistent with the Nebraska numbers, see no reason to doubt their accuracy or the validity of the source.
  13. T

    FATAL TRACTOR ROLLOVER ACCIDENT YESTERDAY

    That?s rough. I feel really awful for his family. The rollover risk really spazzes me out about owning a ROPS-less tractor. It?s why I always decline requests to bring my tractor over to help family, as their properties are all not level and would require a several mile road trip along ditched...
  14. T

    Running a 12 volt motor off the 8n

    It may well be interference, it?s certainly suspicious for that since it misbehaves only when the tractor is running, although certainly a few other things could cause it. You should contact the manufacturer, but you could try throwing some snap-on ferrites for RF on all the wiring. Some...
  15. T

    1948 Ford 8N Temp Guage

    Huh. The boss wasn?t added until 4/1950? That means my 1949 has experienced a head replacement at some point. Not a shock, I knew it was at least a two rebuild tractor.
  16. T

    Moving Global Warming from one spot to another

    Gonna say I?m a little jealous. We don?t get anywhere near as much snow in MD, but we?ve had our least snowy winter in either a lifetime or recorded history, I can?t recall, at my location. One local city hasn?t recorded ANY snowfall yet this season. Looking at my own records, we?ve had one...
  17. T

    1948 8N with proofmeter

    Either somebody mixed up their years on the paperwork, somebody deliberately modded it to include the proofmeter, or the tractor is a Frankenstein with parts from multiple model years. Does the proofmeter work?
  18. T

    1948 Ford 8N Temp Guage

    No. There are a few ways to retrofit one.
  19. T

    Mechanic for 9 N

    Like Bruce says, these tractors are super simple machines. On top of that, they aren?t very valuable, while mechanic services can be pretty expensive. I?ve heard of folks paying a mechanic nearly enough they could have purchased a working N just to get theirs running again, usually for stuff...
  20. T

    Another plow picture

    Mine is some sort of weird hybrid of parts with a heavy fixed, unsprung Massey Ferguson plow and what looks like a decade or two older frame of unknown make. Mine *can* theoretically be disconnected and have the cables rigged to remain in the up position so you can use the 3-point, but I found...
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top