(800) 853-2651
SHOP NOW

Search results

  1. G

    Gleaners with 250 Chevy Engines

    Has anyone here ever put a Chevy 250 or 292 engine into a WC tractor using an adapter plate from a Gleaner combine powered by a Chevrolet 250 engine? What years/models of Gleaners used the 250 engine? Thanks. Garry
  2. G

    Question on Self propelled combines

    My question below on Gleaners with Chevy engines got me to thinking about how SP combines work. There is a gearbox and drivetrain. How is the separator driven? Does the separator have an in/out clutch? Have never had a chance to look at one. Garry
  3. G

    Gleaners with 250 Chevy Engines

    Was wondering if anyone knows what model Gleaners used 250 cubic inch Chevrolet engines and about what years they were used? A friend wants to put a 250 or 292 into a Allis Chalmers WC tractor and he was told that there is an adapter plate on the combines that mates the engine to an Allis...
  4. G

    4000SU spark plug reach

    I am working on Ford 4000SU gasoline tractor for a friend. The spark plugs that were in it are long reach, but the ads for new plugs that I see appear to be short reach plugs. Any information is appreciated. Garry
  5. G

    Was there a John Deere Model 12 Combine

    I grew up riding a John Deere Model 12-A combine with a sacking platform in place of the grain bin. After reading a thread on here about the JD Model 11, I was wondering if they ever built a Model 12? I never knew what the 'A' meant. Thanks, Garry
  6. G

    New Holland 4630 clutch pilot

    Does anyone know if the Ford/New Holland 4630 tractor uses a bushing or bearing for the transmission clutch pilot? A friend has one that is scraping going into gear. The pedal free play seems about right, might need taking up a bit. Any other ideas welcome. Thanks Garry
  7. G

    3600 CAV Pump Fitting

    A friend has a 3600 ag tractor that has a broken plastic fuel line. This line goes from the fuel filter housing to a fitting on the cover plate for, I think its called, the timing port. The cover plate that I am talking about has a lead sealed safety wire on it. I was wondering what this fuel...
  8. G

    Vermeer TM700 Cutter Bar Shaft

    I am helping a friend work on his Vermeer TM700 disc mower. Only the two discs closest to the gear box are being driven. From the looks of parts diagrams for similar mowers, the cutters are driven by a hex shaft(maybe three piece shaft) that runs the length of the bar. This shaft seems to be...
  9. G

    Vermeer TM700 Disc mower shaft

    I am helping a friend work on a Vermeer TM700, pull type disc mower. It seems to have sheared part of the cutter bar drive shaft. Only the first two discs are turning being driven by the gearbox. I have not found a parts list for this particular mower, but have one for a MC840. It looks like the...
  10. G

    Scag Zero Turn Wheel Motors

    I have a Scag Turf Tiger that needs both wheel motors replaced, and was wondering if anyone on the forum has any experience with aftermarket motors marketed by Sten's and others. These aftermarket replacements cost anywhere from $320 to $400. The motors from Scag are about $750 each. I only put...
  11. G

    3000 Lift Won't Stop Raising When In Position Control

    Tractor is a Ford 3000 and the problem is with the 3 point lift. When raising in position control, once the control handle gets to a certain point on the quadrant, the lift arms will not stop raising and continue all the way to the fully raised position. This happens when the handle reaches...
  12. G

    John Deere 5203 IPTO Slipping

    A friend has a JD 5203, has about 500 hours, and the pto clutch is slipping. It would not even make 1/2 a roll on a small Hesston 530 baler before it quit turning the pto shaft. Switched baler to another tractor, worked fine with no problem. Was wondering how the pto clutch was designed and...
  13. G

    Honda Carb Drain Plug

    I have a Honda Sportrax 90 ATV that has the petcock built into the float bowl assembly. On the bottom of the petcock part of the casting is an aluminium drain plug of about 3/4 inch diameter. This plug has a hole corroded through it about 1/16 inch in size. Does anyone have any ideas on how to...
  14. G

    MF 35 Serial Number Prefix

    Looked at a MF 35 a guy bought today and I think the serial number prefix was SNM. Wondering what that designated. Will get a better look and full number tomorrow. It is a diesel. Garry
  15. G

    Heard From Billy NY?

    Has anyone heard from Billy NY? I think he lives around Albany and heard where they had 30 some inches of snow. Garry
  16. G

    How Many HP to Run 18kw PTO gen?

    I noticed a 18,000 watt pto generator for sale. How many hp to get full output from it? Could you get say, 9,000 watts from it with half of the required power? Thanks, Garry
  17. G

    JD 385 Round Baler-Bale Tension

    A friend bought a JD 385 round baler. I was looking at it briefly and could not see how it put tension on the bales. I figure hydraulic, but only saw the two cylinders for the tailgate operation. We have a Hesston 530 with the big springs for tension, so that is what I am used to. Have worked on...
  18. G

    What Does A/C 5050=In Oliver/Cockshutt RRLund?

    A friend bought a Allis Chalmers 5050 today at an estate auction. It has 1,400 hours,2WD,Power Steering, One pair of remotes and good rubber. I know it was made by Fiat and was wondering what the similar models were in Oliver and Cockshutt. He gave $4,700. Around here that is not bad for a...
  19. G

    MF 135 Steering Box Material

    I am helping a friend work on a 1974 135 Deluxe with power steering. It had a failure in the area where the power assist rack engages the sector gear. The end of the guide that holds the rack engaged with the sector broke off and became lodged between the rack and steering housing. It bent the...
  20. G

    Lanse in Texas?

    I see a few posts from Lanse on here from time to time. Did he move to Texas? I was wondering what kind of job he got or if he is in business for himself? Welding, fabricating? Seems to be doing well and that is good to see. I guess I have been out of the loop on what he is currently doing...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top