Search results

  1. J

    D-17 Energy cell leak

    I have done some research and it looks as if every one of the caps to the energy cells on my D-17 diesel have got what looks like high temp JB Weld under them. All advice seems to be that energy cells are very difficult to get sealed off if you remove them. A new energy cell is $140 and a new...
  2. J

    D17 Energy cell exhaust leak

    Could you explain what you mean by the button? The leak seems to be coming from around an oval flat plate with two bolts in it. Is that plate easy to take off or will something come out when I remove the bolts? I was pulling a disk with it for about two hours and part of the way through it began...
  3. J

    D17 Energy cell exhaust leak

    My D17 diesel developed what seems to be an exhaust leak from around the plate covering the energy cell. The cell is the very front one. When that cylinder fires you can see exhaust and feel it around the plate with the two screws covering the energy cell. This tractor is new to me and I am a...
  4. J

    310C Auxiliary Hydraulics

    I have tried to move some of the hoe levers and at first the ram moved very slowly about 1/2" at a time in fits and starts and then wouldn't move at all. I have put the valve in the return position which will stay on until the ram returns and then moved all the hoe functions including outriggers...
  5. J

    310C Auxiliary Hydraulics

    I believe that it is open center. I will check it out. The splitter was originally made to mount to a skid loader. I took it off the quick connect hookup and mounted it to the backhoe bucket. The valve has an automatic shut off on return but you have to maintain position on the valve for it to...
  6. J

    310C Auxiliary Hydraulics

    I have a John Deers 310C with two hydraulic hoses coming out near the back hoe controls in the rear. They have female quick connect fittings on them. I have traced the hoses to an aluminum block mounted on the frame near the front of the right rear tire. This aluminum block has a flipper lever...
  7. J

    John Deere 310C Reverser transmission Problems

    Edpap; Thanks for the info. I have been gone on vacation and haven"t had the time to get into it yet. I will hopefully have time over the Thanksgiving holiday. Sorry it took so long to thank you.
  8. J

    John Deere 310C Reverser transmission Problems

    Roy Suomi; Thanks for the info. I have been gone on vacation and haven"t had the time to get into it yet. I will hopefully have time over the Thanksgiving holiday. Sorry it took so long to thank you.
  9. J

    John Deere 310C Reverser transmission Problems

    mEL; Thanks for the info. I have been gone on vacation and haven"t had the time to get into it yet. I will hopefully have time over the Thanksgiving holiday. Sorry it took so long to thank you.
  10. J

    John Deere 310C Reverser transmission Problems

    My JD 310C was slow about going into forward but went into revesre fine. I checked the fluid level in the reverser and it was a bit low. I noticed a slight leak from a Tee coming out of the side and it has a wire coming out one end and I think the hose goes up fron to a cooler. I rotated the Tee...
  11. J

    JD 310C Hydraulic oil and reverser levels

    Thanks for the info. I drained the reverser oil out and then refilled through the dipstick tube to exactly the level it was suppose to be. I then ran the hoe for about 5 hours with no problems. I checked it this evening just sitting and cold and it was way up on the stick but still looked like...
  12. J

    JD 310C Hydraulic oil and reverser levels

    I recently changed the hydraulic oil, filter, screen, and tank because the oil didn't show in the sight glass. I cleaned the sight glass and everything else and proceeded to put the 10 gallons of hydraulic oil in that the manual says it takes to fill the reservoir. It would never come up in the...
  13. J

    John Deere 310C water problem

    I wanted to let you know that when we got the head off there was an obvious gasket leak that had been there for a long time. The head is a little pitted around the valve and had been bleeding over to another cylinder a little. It looks as if the gasket will seal everything back off and we put it...
  14. J

    John Deere 310C water problem

    I will give the open cap a try. I am prepared to get into the head gasket issue. Hopefully that will be it if I have to go deeper. If you think of anything else let me know. I am going to give it a try in the next day of two and will let you know. Thanks
  15. J

    John Deere 310C water problem

    I will take a look at it and see if it is the problem
  16. J

    John Deere 310C water problem

    I have a JD 310C backhoe. It has a problem with blowing the radiator hoses off. There seems to be excessive pressure in the water system. I had a stick get into the fan blade but don"t know if that has anything to to with the problem. No guages so I don"t know what the temperature is. It will...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top