Search results

  1. H

    Utilitor information?

    i I have a Midwest utilitor garden tractor. It's a early model with single speed and clutch steering.cast iron wheels and in running condition. i also have the implements with it. It gives me a real workout when I run it.
  2. H

    stromberg main jet tool

    Not all about tractors but I am trying to get a stromberg carburetor main jet wrench/tool that will work on the larger main jets. trying to change the jet size on a stromberg ee22 and that jet is larger than a old Ford flathead 97. maybe someone has a source?
  3. H

    case 509 HELP

    Yes I have fuel pressure to the pump. I have only a trace of fuel out of the pump line connectors. the center cap on the head when loosened will pour fuel also sends it out the line connectors while cranking engine over. This engine just quit running. I use it on a head saw for a sawmill.
  4. H

    case 509 HELP

    I have had a failure of my American bosch PSB injector pump. How have other people resolved a failed hyd head on these units. Has a inline pump been used? This machine uses the same parts as the 500 series tractor. I don't want to reinvent the wheel to make this work again.Henry
  5. H

    Brake Pedal Pulses on Dozer

    It might be as serious as the bull wheel drive bearing is bad
  6. H

    New digital TV frequencies?

    You most likly will be out of luck receiving the new DTV signal. The UHF band is used now with some channels (like 30 thru 70s) if they come in crisp and clear you are ok. most stations are sending out a digital signal on the new spectrum and you should be able to check it out. The cellular...
  7. H

    6 volt coil

    forget what I just said i see we were talking batterys sorry
  8. H

    6 volt coil

    yes the coil will work fine for a long period of time without a pronlem. Use a 12v with out the internal resistor. I have done this for years on my old cars and never had any coil failures.
  9. H

    Any ideas about this old manure spreader?

    it looks like a late 40s to mid 50s David Bradley.
  10. H

    MF35 remote hydraulics

    I use them on my to35 and they work togather depending on if you power up only or down only or release pressure to float. the left one on mine will go foward or back and it has a latch on the right side to lock it either in the back position or center. it has to be in the back position to use...
  11. H

    TD-14A front track roller and starter

    At this time I am still trying to get ahold of a good gear reduction starter. Henry
  12. H

    TD-14A front track roller and starter

    I am looking for a front track roller wheel and frame slides (ham bones) for the same also where can I locate a starter?

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top