(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. A

    Think this could be handy??

    Hey folks, looking at something to clean up in/around pastures and keep junk off fences... Sure this thing is prolly chinese made but the price seems right... Link is in german, but the pics show up good. Think it'd be useful or junk that lays around????? There is also just a pruning saw with...
  2. D

    H-4 mag

    sounds like a mag off a w9 or or a diesel or off a stationary motor? not sure I understand your description correctly.
  3. D

    Question for Magneto Experts

    Use a pertronix electronic ignition with a distributor i've heard good things about doing it that way...
  4. D

    M Farmall alternator to generator/Hood question

    What I did was to flip over the old bracket, angle pointing up ward. lightly bolt the bracket in place bolting through the back hole of the bracket to the front hole on motor. I then tack welded a tail on the back pointing towards the driver about three inches long. Once drilled and finish...
  5. D

    Need guidance on Super A steering box

    About 6 months ago I did an A for a neighbor. I lifted the weight of the tractor off the front axle, removed the axle pivot shaft. with the front axle resting on jack stands I was able to lift the front of the tractor further up. remove the tie rods. there are about 6-8 bolts going up through...
  6. D

    o/t ford f250

    pull the radiator cap and install a diffrent truck.....
  7. D

    o/t ford f250

    pull the radiator cap and install a diffrent truck.....
  8. D

    CUTTING ALUMINUM TREADPLATE

    Using a circular saw, Make your cut while cutting lenghtways threw a hard wood board. keep your blade set deep 1.5 in or so.. wood will help clean carbides while cutting.
  9. D

    CUTTING ALUMINUM TREADPLATE

    Using a circular saw, Make your cut while cutting lenghtways threw a hard wood board. keep your blade set deep 1.5 in or so.. wood will help clean carbides while cutting.
  10. D

    old car

    67' Mercury cougar, stock 390, muncie 4speed posi. Could pass anything but a gas station.
  11. D

    old car

    67' Mercury cougar, stock 390, muncie 4speed posi. Could pass anything but a gas station.
  12. D

    Building a bale spear.

    We built a set of bale forks for our skidloader. We used a quick attach plate that we purchased, in addition to that we used berlon spears. we purchased four tapers and three of the shorter spears. our frame looks like an inverted PI sign. we used large rectangle tubing that we already owned...
  13. D

    Question for trailor talk

    It's been my experience that many single wheel trailers have a wider frame rail space. this is due to the fact that you need a wider space for the duals so they space the rails closer.
  14. D

    O/T Trailor Talk

    We pull a 20gvw gn frequently, and these are my thoughts. It's Dual tandem has only four brakes mine cost about $1000 to due a major (electric)brake job. my foot print of my tires is about 8ft square. With triple sigles you have a longer foot print. with slightly low tires and a tight pivoting...
  15. D

    OT: Snow plows for trucks. Opinions welcome

    three power stroke trucks, with two ultamount and one unimount western. I will replace the uni with an ultra when I find a deal, but all work great.
  16. D

    woven spark plug wires

    Does anyone use the woven covered spark plug wire? Green/yellow that you see on the collector tractors sometimes. Is it any good? Who has the best prices? I'm looking for the Yellow/green color for a gift, for a friend of mine. thanks Dale
  17. D

    international truck diesel ????

    The cam shaft position sensor is near the crankshaft pulley, sort of between harmonic balancer and front of timing cover near bottom. Get to it from under neath the truck. 10mm socket with very short extesion. Oil pressure regularor is in the valley on the front drivers side down deep. very...
  18. D

    Western unimount wiring diagrams

    they are all downloadable on the western site, westernplows.com
  19. D

    Worst breakdown

    About two weeks ago my son was finishing up chisel plowing a field. He was driving a John Deere 95 something. I can't remember the numbers of the new series. This four wheel drive with duals on it took up the whole road. This was past dark and there wasn't much traffic on the back roads. He...
  20. D

    Diesel Gator

    Bought a diesel Gator new in 96. I'm disabled and truck it all over the place, has about 700 hrs on it. In 12 years probably spent about $500-600 on break downs not bad in my book. She has a preaty easy life, easy to work on. I go through it every spring Oil, ect..
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top