10 spline wheel

[Oldiron29]

Can anyone tell me about this wheel what it is off and what it will fit. F&H round spoke
9x36 10 spline wheel
Thanks oldiron29

 

[James Howell]

"<font color="#6699ff">[b:654c4848f0][i:654c4848f0]tell me about this wheel what it is off and what it will fit.[/i:654c4848f0][/b:654c4848f0]</font>"

 

[James Howell]

Sorry about that; pulled the trigger too quick.

The 10 splined 9x36 F&H wheel will fit an unstyled Model B tractor.

Take a look at the diagram below.

Note the spoke type wheel (Key 1) description.

Take a look at the diagram below.

Note the final drive gear (Key 15) is 10 spline.

Hope this helps.

 

[Oldiron29]

James, I know my Regulars Better! I have been poking around can't find any picture of a tractor with this wheel on it. The picture you posted is flat spoke this is round spoke, I do believe it will fit JD B. How ever Can't find one with it. Is this an uncommon type wheel? I picked them up a auction for the tires and would like to sell the wheels. Can't list them if I don't know what they are for. Thanks oldiron29

 

[barry county]

The hub does not look like a normal JD hub for an unstyled B or early unstyled A. Might still fit one or the other, possibly from some short line manufactor. I think Oliver 70 also used 10 spline? I'd be interested in seeing the other side of the wheel. Also might be interested in them if price is right.!

 

[Oldiron29]

Barry, When I get the tires unmounted I will take picture and list them in the photo adds.
You could make me an offer if you like [email protected] located in NY.

 

[James Howell]

"<font color="#6699ff">[b:654c4848f0][i:654c4848f0]can't find any picture of a tractor with this wheel on it[/i:654c4848f0][/b:654c4848f0]</font>"

Take a look at the photo below of Slide 21 of the "<a href="http://www.jd2cylservice.com/GOG2006w.pdf">Wheels Used on John Deere Tractors</a>" presentation.

"<font color="#6699ff">[b:654c4848f0][i:654c4848f0]Is this an uncommon type wheel?[/i:654c4848f0][/b:654c4848f0]</font>"

Yes, an original pair of rear, round spoke wheels ares both uncommon and very valuable.

Hope this helps.

 

[James Howell]

Agree.

I should have looked at the photo closer.

 

[Oldiron29]

Those JD use a clamp this just has 2 bolts going through it. oldiron29

 

[ecclap]

Can you find a casting number on the wheel? There should be one in the flat face of the hub somewhere.

 

[PatDetwiler]

Its for Oliver 70, or 60? - cast hub is F&amp;H Hc307 with a couple different rim sizes and also dual.

Can be fit for John Deere B and will be loose like about 1/16" isn't good idea.