1010 crawler

[D. L.]

My 1010 crawler clutch pedal fell to the floor and has no resistance. started it in gear and now it will not move at all

 

[Neu-rich]

Broken Shaft, Causing Throw Out Bearing To Drop Out ??? Or Pressure Plate Broken ?? Does It Have A Reverser ??? Just Guessing !!!

 

[D. L.]

Yes it does have a reverser-it seems like a lack of fluid problem because it worked fine then sat for a month -pedal fell and machine won't move

 

[Plant Doctor]

If it has a reverser, my guess is that the roll pin that attaches the clutch pedal to the clutch shaft is broken. The only thing that returns the clutch shaft to the forward position is the spring that is attached to the clutch pedal. So if the roll pin broke or came out when the clutch was pushed down, the tractor will not move forward or backward. I had two 1010 crawler loaders, one gas, one diesel, and I had this problem on both. I hope this is the problem, because it's an easy fix.

 

[D. L.]

I will check the roll pin, Thank you for your help