1010 engine

[david shadid]

I have a 1010 JD with the 145 gas engine that's stuck. Will any other engine bolt up in place of the gasser? Isn't this engine the one with the liners and top deck all in one piece? If so what holds the liners and deck in place and will it move when the engine is taken apart? Any help is appreicated. Thanks, david

 

[Bob]

The liner/deck assembly is held in place by the cylinder head. With the head removed, the deck plate/liners are free to lift out of the block.

 

[JDemaris]

1010 did not have a 145 gas engine, only the 2010 did. 1010 gas is 115 c.i., almost exactly the same cubic inch size as a two cylinder 420/430/440 (113 c.i.). 1010 diesel is bigger at 145 c.i. and is the same size as a 2010 gas.

Any 1010 or 2010 gas or diesel engine will bolt in, along with several power units and combines that use the same. 1010 and 2010 use the Dubuque two-cylinder bolt-pattern, same as the older two-cylinder engines.

 

[buickddeere]

Just for the sake of knowing. The entire front half of a 440ID will bolt onto the belhousing.