1010W steering help

[jay1977]

Good Morning!
Recently purchased A 1010W Gas with a backhoe/Loader. It runs good and functions as it should , But someone along the lines unhooked the power assist steering . I have the manuals but would like someone to post pics of how its supposed to be hooked up so I can start figuring out how to put it back together and figure out why it was unhooked. The steering pump is in the counsel then it goes to the valve by the steering box, then its unhooked where its supposed to go to the cylinders . Any help would be great!
Thanks

 

[jay1977]

Also what fluid is it supposed to be running for power steering?

 

[Dan in Ohio]

jay,

The manual says SAE 80 in the power steering cylinder housing and 5W-20 in the hydraulic system.

 

[buickanddeere]

Be ready to find a high pressure leak .
The free online JD parts book will provide a list of seals, bits and pieces .

 

[jay1977]

I'm thinking if so I'll adapt it to a full hydro setup like in my off road rig(since what I've read says the og setup is a nightmare anyway).

 

[Dan in Ohio]

jay,

I will send you the old style parts manual for the 1010W if you open your email. The old parts manual are much easier to navigate than the new ones IMHO.

 

[jay1977]

thanks Dan!
btw where in Ohio? I am in Bellevue(which is by Cedar Point kinda).