1086 International

rhoadwm

New User
I have just installed new alternator on my 1086 when i went to hook the hot wire to back of the alternator it arched. Is that wire suppose to be hot when the key is off?
 
(quoted from post at 14:45:44 10/31/19) I have just installed new alternator on my 1086 when i went to hook the hot wire to back of the alternator it arched. Is that wire suppose to be hot when the key is off?

The large output wire that connect to the alternator is "hot" all the time.

One of three things going on...

New alternator is "bad".

Battery(s) connected with reverse polarity.

Battery(s) connected properly, but CHARGED BACKWARDS. (Yes, that can be done.)
 
Bob is very much correct. the diodes in the alternator should make that terminal appear to be open (not connected) until charging happens, then the electrons are moving the other way. Jim
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top