12 volt wiring on 2N ford

C T

New User
I purchased a 2N converted to 12 volt. It has never charged the battery. New alternator, no difference. The wiring is all comming apart & I am changing all of the wires. I am certain the wiring it had isn't right. One comming from the terminal in the back of alternator goes directly to the battery. Another one goes to the lights, another goes to one of two of the connectors on top of the alternator. Another wire comming out of the second connector on top of alternator going to toggle switch for lights.
I NEED SOME HELP. Thanks a million.
C T
 
Go down to the 9N/2N/8N forum and then look in the archives and Bob posts a picture of how it should be wired. If you can not find it let me know by posting back and I will explain it to you
 
Well, CT, here is a diagram I kinda like (I should, I made it). It was originally drawn with ammeter connected to read only alternator output, for a gentleman who wanted it that way, but I have marked changes to make it a NET reading ammeter (I prefer & is more like Ford did it). It also shows connections for either/both a 1-wire alternator or the 3-wire connection, your choice. If you want an "Idiot" light, then just substitute it into the spot where the diode is shown (any small 12 volt bulb such as marker or instrument panel bulb).
9N_2N_12v_conv_net_read_ammeter_v2.jpg
 
I really thank all of you for the help. You give me the information I needed. I really really appreciate the help.

C T
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top