1460 wiring

[jparx]

looking for wiring info on the stack valve. Manual shows all wiring for header lift, unloader spout, and basic reel drive, my machine has the reel aft/fore position switch but no wiring diagram for that harness going too the stack valve. It is only three wires

 

[urbancase]

if i can get ahold of my goddaughters husband this week end, i sold him my 1680 and i had all the books for this, i will see if i can get a picture of the diagram and post, or maybe more then one pic. been a few years but that was a rocker switch on the console. i see what i can get.

 

[jparx]

yes a rocker switch on console. Should be a three-wire harness going too stack with three different colored green wires..
thank you for the help

 

[urbancase]

yes a rocker switch on console. Should be a three-wire harness going too stack with three different colored green wires..
thank you for the help

Talked to my Chris he not coming down this weekend, but will let me know and will try and get you what you need. FYI

 

[jparx]

ok thank you

 

[urbancase]

Here you go, Chris stoped to get this for me, it was out of my 1680 r and r manual. See if this helps

 

[jparx]

thank you