1550 brakes

[Mike(NEOhio)]

I found the left side brake dripping oil last year. Got new seals and discs and a new seal for one axle that had a small drip. Got under it to adjust the right brake which was sticking badly and noticed the left brake was dripping again. I have another seal since I didn't bother changing the right side since it was dry and just put the new discs in. Thinking I should get a speedisleeve. I really don't want to pull the whole bearing quill. It's hard to assess the condition of the shaft that deep in the housing. Advice please?

 

[super99]

Probably a good idea. I used one years ago, don't even remember what it was on but it worked great. Have a couple of leaks on my 1550 that need speedi sleeves, just don't have the ambition to do it anymore.

 

[Mike(NEOhio)]

Probably a good idea. I used one years ago, don't even remember what it was on but it worked great. Have a couple of leaks on my 1550 that need speedi sleeves, just don't have the ambition to do it anymore.

I found one from SKF haha......$99. I'm gonna open it up and see where it's actually leaking and decide from there.