he part that broke off was threaded several inches(quoted from post at 14:22:25 12/27/21)
Take the pieces to a machine shop and have them make you some. It might be worth having two sets made while they are doing it.
(quoted from post at 11:27:36 12/28/21)he part that broke off was threaded several inches(quoted from post at 14:22:25 12/27/21)
Take the pieces to a machine shop and have them make you some. It might be worth having two sets made while they are doing it.
I don't rightly know about brand except its black 1800 QT and has a plate that says SMC corp.(quoted from post at 08:54:47 12/28/21)(quoted from post at 11:27:36 12/28/21)he part that broke off was threaded several inches(quoted from post at 14:22:25 12/27/21)
Take the pieces to a machine shop and have them make you some. It might be worth having two sets made while they are doing it.
Do you have the pieces, or did you lose them? Do you have some of the thread and can you estimate the length? With some thread to identify and an estimate of length a shop can make something.
You don't say a brand. Rhino? Alamo? Schwartz? All fall under the Alamo Group, perhaps you could try contacting them for possible info. By any chance is there a dealer's sticker anywhere on the loader? If there is, you could try calling them to see if they are still in business and might have ideas.
i did it.Waiting for answer(quoted from post at 10:26:11 12/28/21) I believe SMC Corp was Schwartz after a couple ownership and name changes. SMC Corp was acquired by the Alamo Group.
Your quick attach may not have been original to the loader. There are some things in your picture that look like the quick attach adapter pins sold by Tractor Mike, not that many of these attachments don't look similar. You might try contacting him and see if he has ideas. It can't hurt.
https://asktractormike.com/
(quoted from post at 17:49:35 12/28/21)![]()
Yeah but i can fix that(quoted from post at 15:03:25 12/28/21)(quoted from post at 17:49:35 12/28/21)![]()
That looks like you have a good bit more for repairs to make than just replacing a couple broken pins.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy