1949 - 44RC Decal Placement

[WOK]

The decal kit I obtained has 2 decals I need help on, if they were used originally. The "Recomended Air Pressures" was where? Was it possably on the outside of the sliding tool box as there may have been one there? The '52 parts book shows one in the kit. The other decal is a 2 line (5/8"x3 5/8") "Wash in disillate or kerosene every 120hrs etc." I am able to measure and place exact all others as the tractor wasn't repainted and I had it stored inside for 30 yrs. I wish I could find a new grill screen for the that decal. I found a new one several years ago but is for a smaller tractor. Thanks!!-WOK

 

[JJL]

I've only seen the air pressure decal on the tool box and the wash decal is on the bowl of the air cleaner.

The front screen was being reproduced too. I think it was Kevin Youngquist of Kensington,KS. email [email protected]
Phone 785-476-2269

 

[robs 44]

tire pressure decal goes on inspection plate on top of bellhousing, other on air filter housing bowl

 

[Kornkurt]

The tire pressure decal, without a doubt goes on the tool box, left side front part of the box. Do not put it anywhere else. Good luck!!