1950 8N Side mount distributor question

Tebernok

Member
I was having some issues with rotors busting in my distributor, after 3 of them I noticed that the top half of my distributor seems really loose and spins freely, is that normal? If not, is there some adjustment to make or is the distributor shot? As far as I can tell it is the original distributor so it might stand to reason that after 70 years it might be worn out.
 
(quoted from post at 10:06:33 01/09/21) I was having some issues with rotors busting in my distributor, after 3 of them I noticed that the top half of my distributor seems really loose and spins freely, is that normal? If not, is there some adjustment to make or is the distributor shot? As far as I can tell it is the original distributor so it might stand to reason that after 70 years it might be worn out.
hat is the "top half of distributor" to you?
 
(quoted from post at 10:49:28 01/09/21) If the distributor cap is on i can spin it
by hand with the spring clamps on.
heck the tab and notch on cap and distributor base.
 
Looking at the parts page, there are 2 different caps, something about a Tisco replacement distributor, which you probably don't have.

But there is also supposed to be a dust cover under the cap. If it is missing, the cap will sit too low and not lock the tab properly.
Dust Cap
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top