1957 John Deere 420

petley2003

New User
Just wondering if anyone can answer my question. No one seems to know what I am talking about. On my distributer, there a Cam screw. Is it supposed to just sit in there or does it need to be tight?
 
It's been a long time since I was inside a 420 distributor. Could you be talking about a screw that is used to adjust the point gap. If it is that type of screw, it is only used to open or close the point gap before tightening the point set mounting screw. That eccentric screw does not tighten down - it is what you could call a ''built in'' tool to make fine adjustments to the point gap. After having said all that, I'm not certain that the 420 has that type of eccentric screw in the distributor.
 
The eccentric screw is always loose
by design. It's only job is to open
or close the points to set the gap
after you loosen the base screw.
 
(quoted from post at 14:02:26 10/25/22) Just wondering if anyone can answer my question. No one seems to know what I am talking about. On my distributer, there a Cam screw. Is it supposed to just sit in there or does it need to be tight?

Yes, if you have a Delco Remy distributor there is a cam (eccentric) screw that is used to adjust the contact points gap. It does not tighten down it is free to turn around and around, with a bit of resistance. Slightly loosen the outer screw, which tightens down on the point base and locks the points in place, once adjusted. The points base has a hole that fits around the head of the cam screw. Turning the eccentric cam screw moves the points base to change the gap with the arm contact. Using a screwdriver to hold the cam screw prevents the points base from moving while tightening the outer lock screw.
 
You are correct.. The 420 has a Delco-Remy distributor and all Delco dist. have a loose cam screw to help adjust the point gap.. It is attached to the breaker plate.
 

All Delco Remy distributors used in the 420s (and a number of others) of that vintage have cam screws. However, just to be clear, not [u:2c294e3eea]all[/u:2c294e3eea] Delco Remy distributors used cam screws to aid with adjusting the points.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top