1968 403

[d282]

Hello- Have you put your diesel in your combine yet? I just bought a D301, but am wondering if you used the same radiator, fuel tank/pump and separator clutch housing that was on your 263.

My email is not working at the moment, as it is located in Marshalltown, IA, which was hit with 80+ MPH winds. Tons of trees down, and thousands of acres of flat corn! Power should be back on in the next 24 hours.

Thanks

 

[GASTON]

d282,have you taken any pictures of the project,and if you have please post them. gaston

 

[1968 403]

Hi 282 good to hear from you. I haven"t got the engine on the 403 yet. The 282 is set up as a power unit and I am giong to pump water with it this summer to be sure everything is ok before I switch it to the combine. According to my 403 parts book the radiator off a c263 will work on the d282. My parts book says the separator housings are the same so it should be a straight bolt up procedeure. If your 301 is off a combine the front plate already has mounting for the hydraulic pump. I know I am forgetting something been a long day irrigating corn. My email is [email protected] feel free to email me anytime

 

[1968 403]

Oh yes 282 you should be able to use the same fuel tank just plumb the fuel return line into the tank or your fuel line. Your fuel pump will work I would add a water separator between the tank and pump.