1995 S10 pickup

jmtme56

New User
does any one know if any other transmission can be adapted to this truck 5 speed 6 cyl it seems that chevy only made this one for 1 year 96 up 94 down wont fit which makes a used one 600.00 ouch all other years 250.00
 
The chev v6 used a common belhousing pattern with all 90 degree chev engines. Is the trans a Borg Warner or what? It maybe common to several vehicles, sometimes even Fords. Is the vehicle a salt and rust free south western unit? Being 17yrs old is it really worth the time and expense? Those 95's also used a miserable fuel injector system .
 
its in south west UTAH rust and dent free just a good old desert road truck it was a phone co truck i bought 5 years ago 600.00 it would be worth a clutch and tranny for me just dont know where to look
 
I'd imagine that anything back to 88? would work. The 4.3 Bellhousing should be the same back till then. In 96 I think it changed with the Vortec. It looks like it should be a Borg Warner T5. 96+ uses a NV1500.
 
88 was Getrag behind the 4 cyl. Gotta have ATF in them or they will shut down. Watch for any leaks. Dave
 
I would imagine there are quite a few transmissions that could be made to work. The question is how much stuff are you willing to change to make it work? How good are you at fabricating stuff to make something that wasn't originally there fit and work? I'd be most concerned with clutch linkage, rear trans mount/cross member, shifting linkage or where in the floor the transmission mounted lever sticks up, drive shaft length and the front yoke. Heck you can buy a kit to put a small block Chevy V-8 into one, a lot of them for sale up here have had a V8 and TH350 swapped in. College friend had a '67 C-10 six cylinder with three on the tree that ate transmissions, after about the 4th one (he was hard on equipment) he had no more free or nearly free 3 speeds available. He found an old 4 speed from a C-60, granny low and a drum style E-brake on the output, you know it wasn't really that hard to make it fit, about the worst was having to heat up the gear shift and bend it so it didn't get tangled up in the dash. To bad the transmission was bad (no second gear) so we replaced it with a pick up truck 4 speed the next weekend, all weekend he complained about having to spend $75 for a new used transmission.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top