2000 Fuel line

[Ltljon]

I cant find this specific line by its self or in the usual group of 3 for this model. It leaves the glass bowl & runs to the carb. The end either needs reflared or a furrel but if its replaceable Id just as soon put a new one on.
Best just to buy a straight & make it work?

 

[shaun wallace]

Had a rubber grommet when new. I replace using short piece of fuel line,1/4 or so long.

 

[Ltljon]

Had a rubber grommet when new. I replace using short piece of fuel line,1/4 or so long.

Its on the carb side tho but I may still have to come up with something like that.

 

[Hobo,NC]

Its on the carb side tho but I may still have to come up with something like that.

I think shaun means he makes a new grommet by cutting a piece of fuel hose1/4" long are so long. I have made the grommet are used some I had on hand. The original is not flared its just a length of steel line.

 

[Ltljon]

I think shaun means he makes a new grommet by cutting a piece of fuel hose1/4" long are so long. I have made the grommet are used some I had on hand. The original is not flared its just a length of steel line.

I went by Napa to see if he had anything & get a filter. He did the sane thing, cut off a small piece of gas line. Ima give it a try this week.