2023.05.08 "Extra" Pic

[kcm.MN]

Puzzle: https://jigex.com/NNLhx

 

[db4600]

CJ-3A and early NH baler.

 

[muleman51]

That sure beat a hayloader and loose hay. Very progressive.

 

[Richard G.]

Got a friend that used a belt pulley on the back of his old military jeep to pull his syrup mill last fall.

 

[Barts Dad]

Ive never seen a baler or combine with the pickup on the left side. Is that a real thing or did the negative get flipped when they printed the picture?

 

[Deere Mark]

New Holland model 76 baler with Wisconsin engine. Heavy baler and hay wagon could be too much for that Jeep unless on very flat ground.

 

[Roger in Iowa]

Believe it is a CJ2A. Does not have the high hood for the overhead valve engine.

 

[db4600]

Im not versed in Jeeps and I figured my assumption was off. Did the CJ-3A have PTO?

 

[Roger in Iowa]

My post below is wrong about the higher hood. But it does look like it has a split windshield that the CJ-2A has.

 

[Goose]

I never saw an Allis Chalmers 5' pull type combine where the pickup WASN'T on the left side. And they were almost standard issue on farms after they came out.

I can recall at least 5 that I operated at various times.

 

[Paul Janke]

We had a 1965 Jeep CJ5 with a PTO. We used it to run a grinder mixer one winter.

 

[Roger in Iowa]

Pto was not factory installed. They could be installed on all 4WD up to and including CJ5. Google Jeep and see if you can find the video of what all could be attached. I know of; pto, 3 point hitch, trencher, mower and plow on 3 point.

I have had CJ2A, CJ5, Jeepster and Scrambler. Then made the move to '76 Bronco, big mistake. Then to '86 Power Ram, '01 Dodge. '08 Dodge, and now '19 Ram Classic.

 

[db4600]

Early NH model that was in fact LH. I cant tell you the model number.

 

[gene bender]

The AC cOMBINES WERE ALL LEFTHAND

 

[DoubleO7]

(quoted from post at 11:23:01 05/08/23) My post below is wrong about the higher hood. But it does look like it has a split windshield that the CJ-2A has.

CJ-3B was the high hood flat fender.

 

[DoubleO7]

(quoted from post at 09:35:11 05/08/23) Ive never seen a baler or combine with the pickup on the left side. Is that a real thing or did the negative get flipped when they printed the picture?

The Jeep is still showing left hand drive.

 

[710ltd2002]

Im surprised that keep is heavy enough to pull that load.
Dave