Mike Deller
New User
Looking for some help here on my 2090. I posted here last year about the remote valves on my 2090 intermittently working and not working. I was pointed in the direction of the compensator valve. Took it apart this winter and cleaned it up. Didn?t see anything noticeable. Also changed the filters and cleaned the suction screen which was pretty clean already. Fired her up and right away both remotes are 2300 psi at idle, thought I fixed it. Let it run a while and moved the tractor pressure is back down to 0 at the remotes. If I rev the tractor up and switch through the 3 power shift speeds while pulling the valve on the remotes they eventually start working. If I idle back down they quit working. If I turn the tractor off and let it sit for a while then start it up the remotes work right away but quit once I move the tractor and I have to go through it all over. I did a test last year where I checked the signal pressure from the valves and was getting 325psi. I?m not sure where to go next and would appreciate any ideas? Thanks
