2600 PS pump

[John (TR)]

Got the powersteering pump front casting back from the machine shop yesterday. Now she takes 2 of the same size seal 11/16 shaft by 1.125 OD. Installed the seals and had the pump back together in under an hour with all the new orings

Bought a used HVLP gun from my neighbor who paints professionally, its a DeVilbiss GFG-517 lightly used. Painting sheetmetal and top of the motor this coming Sunday. Ultra Dog has been right on all the PS parts, not to hard to work on, biggest chore is getting to them.

Now wheres that left over small oring from the pump kit go???

 

[Super99GM]

There is a small oring on the elbow fitting. This fitting is the pressure output. Be sure to replace the oring before you mount the pump on the tractor. On most there is a clearance issue turning the elbow with the pump mounted.

 

[John (TR)]

Thanks, Ill look for that. I assume its the one on the pressure side????

 

[John (TR)]

That was it, thanks!