290 planter

[Lonni]

I have a 14 tooth drive sprocket that runs on the hub. my
sprocket is partially broken but I think it could be permanently
attached to the hub. Does anyone know if that would create a
problem with operation?

 

[BobReeves]

If I saw what I think in your other posts I would see if I could find a 6 point socket that was the same as the section that is broken off of your sprocket. Cut the back of the socket off (where the square drive is) then weld it to your sprocket to replace the broken part.

 

[Greenfrog]

Greenfrog back here...
Was wondering if you made progress on the sprocket.
The post here about just welding it to the hub is what I had in mind also.
It won?t look original but I think it would be functional.
Might be sort of unnoticeable actually.