2N Hydraulic Pump Control Valve Assembly

[FiremanKyle]

Well, no one was more surprised than I. Pulled the lid on my 2N due to lift issues. I went to reinstall it and wasn't able to attach the fork to the Hydraulic Pump Control Valve Assembly. I found the spring, so I drained the oil finding the bar and small diameter pin, but not sure where the bigger pin is at, I've run a magnet within the oil, but to no avail. Where could this pin have went to? I'll be replacing the Hydraulic Pump Control Valve Assembly later.

 

[John Deere D]

Still in the Control Valve BORE.????
Bob..Owner 2-N ....

 

[FiremanKyle]

I did find it, took a little more checking, it was in the bucket.

 

[mhb@ufe]

That pin is broken which is why it came apart.

Mark