2N plug wires

[Tom N MS]

Any other suggestions on how to crimp plug wire ends on the wires? None of theseso called parts stores around here know what I"m talking about-don"t know their butt from a pop gun.Trying to do it with pliers and such just don"t get it-wires don"t snap and lock into the dist. cap like they should.

 

[justjim]

a wire stripping tool with a crimper on?
maybee thats what i have used before

 

[Ronnie Graves]

where in ms are you? Im in collins I have all the tools to install plug wire ends on all sizes of plug wires evan right angle ones
e-back or call me 601-765-8720 after 09:00

 

[Tom N MS]

Ronnie, Thanks. I"m in Wesson-My Dad (who needs the tool) is in Bogue Chitto...Will call you later today..Thanks again..Gary

 

[Tom N MS]

Yes, that is basically what it is but the crimper hole in the nose of the tool is just larger than those made for small wire ends.

 

[souNdguy]

got an old 'f' connector crimper?

otherwise.. stick wire thru.. solder, and then leave ends belled a bit for positive lock into the cap, and US for the plug head

 

[Dave8N in Pa]

Soundguy, I never thought of trying an F connector tool, THANKS

 

[BB in Maine]

Summit Racing sells a variety of crimping tools $8.00 and up. I have their cheap model and it worked great. Good luck

 

[souNdguy]

it's what i use for the ends that goes on the plug itself, those that hav ethe clamshell grip for the wire and conductor. seems to work great for me. My tool does 3 sizes.. and usually the middle size works best.

 

[Caryc]

(quoted from post at 17:24:33 09/25/13) Soundguy, I never thought of trying an F connector tool, THANKS

Check out my post in this thread. http://forums.yesterdaystractors.com/viewtopic.php?t=1063929

 

[whopist]

(quoted from post at 01:39:43 09/25/13) where in ms are you? Im in collins I have all the tools to install plug wire ends on all sizes of plug wires evan right angle ones
e-back or call me 601-765-8720 after 09:00

Ronnie, know anyone around Seminary that bales hay?

Whopist