2N

[Matt G.]

I need a manifold for a 1945. How much and where to get?

 

[Dan in CO]

Look on the left side of your screen under "Marketplace" and get to exhaust parts $48.31. Don't be surprised when you get it and it says "made in Turkey". I bought one & had to do a bit of grinding to make it fit right

http://www.ytmag.com/store/parts/pics/wm_9N9425WG.jpg

 

[Sean (TX)]

Parts

 

[david heath]

yea, i know about turkey parts, my proofmeter came from there, junk read backwards, sent it back got one from india works good even has light up on it. buddy bought new case tractor made in turkey he had it for 2 weeks then got rid of it.

 

[Bruce (VA)]

I got one from nnalert's 2 weeks age, $60, and it fits perfectly. It came painted as well. No problem getting the socket in to tighten the bolts.

If you are replacing the manifold, you needs the brass bolts & washers. The nuts are, 7/16-20 x 5/8, NAPA part number STX104X, 27 lbs of torque. You should at least have a stud or two handy if you run into problems. Studs are 1-5/8 long 7/16-14 lbs, use 55 lbs of torque on the studs. NAPA part number for the stud is 86632. Use washers.
50 Tips