3 point leaking fluid

[Case530]

while using my 530 today notice Hydrolic Fluid coming out of the rockshaft for the draft arm of the 3 point. now the arms won't stay up after the engine is shut off, I figure the Rockshaft cylinder has blown the seals. My question is how hard are these to replace and what else should I look at when I have it apart. Thanks for any advise. Darryl

 

[Joe Young]

Darryl

I'm not sure what you what else you might look at, other than possibly inspecting the pinion and bull gears when you have the top plate off. It a pretty straight forward repair. A link to a previous post on the repair is below. - Joe

<A HREF="http://search.yesterdaystractors.com/cgi-bin/viewit.cgi?bd=case&th=212106">Instructions for resealing 3-point piston.</A>

 

[Case530]

Joe
Thanks for the info