3 point quick hitch adapter

[Jefd]

Anybody have any knowledge of a 3 point category 2 quick hitch adapter? I found some online that look like no modifications would have to be done for my old machinery. Thanks, Jeff

 

[Jim.ME]

A common complaint with quick hitches is they do not fit all equipment properly as there can be slight differences in the hitch points, the top link one is often an issue it seems along with width at the lift arm pins.

 

[Ohio88]

I have had one for years and it works great. I did modify 2 pieces of equipment that had cat 1 so they would work with the cat 2 quick hitch. Would not be without one. Mine originally came from tractor supply.

 

[Scott 730]

I have a JD quick hitch on my 4020. Handier than a shirt pocket. Century sprayer, Glencoe diggger, Artsway rotary mower, IH 710 plow, unknown brand chisel plow, Feterl snowblower all fit with zero issues.

 

[Fixingfarmer]

We have a couple speeco and JD the bigger ones work better. I don’t put them on the A or b it just extends stuff back even farther and the arms are easy enough to move around as it is

One thing I’ve done that’s probably a different thought than most is leave the 3rd link on the implement ready to go at the right length since there’s isn’t a good spot to store it anyway on the A. It means you have to have a couple more links around than usual but speed hooking up isn’t really an issue then

With the quick hitch I still had to adjust it for each implement

 

[Tony in SD]

I just bought a piece of pipe that was Cat 1 ID and Cat II OD. then I just cut off a piece to fit the implement Cat 1 pins and leave them on that implement. Cheap works well. Anything 3pt I build, I make sure it fits my quick hitch.

 

[joeysmith]

I just use the store bought pins for that

I just bought a piece of pipe that was Cat 1 ID and Cat II OD. then I just cut off a piece to fit the implement Cat 1 pins and leave them on that implement. Cheap works well. Anything 3pt I build, I make sure it fits my quick hitch.

 

[mrhud]

they are all right if you make every single piece of equipment you own the same then as soon as youbuy somthing else it probley will need to changed fit . if you have easy hookup lower arms and they work proper then you only need to get close to hook up anyways