300 utility run away throttle update update

[Corona Boy]

Well. Short version. No matter how busy you are,always take your own tractor apart. My dad and son helped me out and pulled the head. In the process things got bent. Throttle lever, governor rods etc. Three hours straightening linkages and presto it works great! Now I need to find a source for hydraulic pump seals.

 

[Janicholson]

Take the pump (and seals) to Motion Industries, or Kaman inc, they will match them. NAPA might do it if you have a good store. Jim

 

[Corona Boy]

Thanks for info. Don't have a Motion Industries anywhere close. Used to have a Kaman Bearing in town. However, we do have a NAPA, and a couple of good independent stores. And one of the best old fashioned parts guys you could hope for.

 

[wisbaker]

Here in the Midwest NAPA bought or got bought by a bearing house IIRC it was Motion Industries, but I just checked on the net and the store I used that was associated with NAPA is now Wisconsin bearing.