3000 Headlight parts needed

[Hotflashjr]

The headlights were not working on the 3000 I recently obtained. I took them apart and one side has what looks to be an original wiring set up. Quite a cool design with leather pads and all still intact. I did verify the bulb is working and got the light to work. The other side is just the three wires. Looks like two power and one ground.

I d like to find the guts to fix the second light but I m guessing they are not available. I also need the cork gaskets for the glass lenses to the housing.

Any help is appreciated!

I am guessing I can put a sealed bulb in the second light and that will work.

 

[sweetskillsrk]

Hey Flash Jr., I'm actually in the middle of reconditioning my 3000's lights as well. When I bought the tractor about 6 months ago and got it home, I realized all the lighting wiring was cut and totally removed for some reason. I got the original switch cleaned up and put back together and I recently removed the headlights. I'm working on cleaning the lenses, the lens rings, and the housings and I'm giving everything a coat of paint while it's off too. Since I have to run new wiring anyway, I'm adapting my lights to H7 halogens since that's what a couple of my cars take too. All that being said, I do have the original light bulbs, which I think are still good, and the original wiring connections too. If you would like them, they are yours for the cost of UPS shipping. I have pretty good night vision, but I'm looking forward to getting the lights back in working order.

 

[shaun wallace]

Them are lites that are used on A and B prefix serial numbered. C prefix used sealed beam.

 

[Hotflashjr]

Yes please! I d love the opportunity to have whatever you are not going to use.

Bodzinski 1 @ hotmail . Com

Just remove the spaces for my email.