3020 Rear Weight

Chaz

New User
I am finally going to change out my calcium filled rear tires and rims. I would like to use a couple of weights on each side but have not been able to find a source for these. I even asked at my local JD dealer and they were no help. It wasn"t the usual parts guy so I will have to try again when the regular guy returns from vacation. I hoping someone here can offer some suggestions on where I might find some weights.
 
Best place I have found is farm or consignment auctions. Most of the guys around here run newer machines so they aren't to concerned with tractors that are pushing 40 to 50 years old. A lot of the times you can pick them up pretty cheap.
 
Chaz, Call B&M Tractor parts @ Taylor Texas. About 16 east of Round Rock Texas. Last time I was there Doug had a truck load of them, seemed like they were about $45 to $50 bucks / set.
Later,
John A.
 
You don't mention the vintage of your 3020 but the later models with 38" wheels should take an A3404R weight (145 lbs each). I'm actually looking for some used (but usable) wheel weight bolts. Anybody have 6 extra bolts laying around not being used? Please contact me.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top