3414 backhoe

kruck

Member
Need help. Dad bought a 3414 international industrial backhoe. We can't seem to find the serial number tag. Any suggestions where to look at on this machine? Also, we are looking for a manifold and a carb. for the gas engine. Anyone have one or know who does? The dealer can't get them we been told. Thanks
 
The intake manifold is used on several other IH tractors. Any tractor has the BC-144 engine. Other tractors that use the same engine are - B275, B414, 354, 354, 364, 434, 3414 and 3444
industrial.

Used manifolds turn up. I searched for awhile and bought two of them. One on Ebay and one from a tractor junkyyard. There are two versions. The early manifolds have a two-bolt exhaust flange, and the later ones have a three-bolt exhaust flange.

3414 gas manifold is # 3 044 236 R91 (two bolt) and # 3 060 305 R11 (three bolt)
Three bolt gasket is # 3 060 566 R1. Two bolt gasket is 704613R1


The carburetor is a British Zenith. Keep in mind that British Zenith has nothing to do with American Zenith, so don't try to find parts locally. British Zenith got taken over by Solex years back. This Website sells carb kits for your machine, but they are pricey. What you have, if original, is either a VN or a VNN carb. One barrel, 30 mm. VN has an accelerator pump like cars and trucks do (with carbs). VNN is a cheaper version and the pump is left off.
If the carb was replaced with a new on in the 80s, the replacement carb from IH is a Zenith 30.IZ and is totally different from the original carbs. If you buy a new replacment carb here, it will be even more different.
One note. You can buy good used carbs pretty easy in England. I bought a few on the British Ebay and had them shipped here. Same carb on your 3414 was also used on several cars in England.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top