Todd Dykman
Member
I have it torn down. Leaving the crank and cam in. This tractors not going to see a whole lot of field work. Mainly had water intrusion and extrusion. head gasket died, think cylinder walls might be letting some water in, and a major major major crack and failing repair on the top of the block... so, I'm hunting for a replacement.
Going to head to renaissance tractor here in Washington state to see if they have a decent one there.
I'm new to the whole tractor restoration, and engine overhaul, but so far it all seems pretty straight forward.
Any guidance would be helpful.
especially if you're familiar with D's
Going to head to renaissance tractor here in Washington state to see if they have a decent one there.
I'm new to the whole tractor restoration, and engine overhaul, but so far it all seems pretty straight forward.
Any guidance would be helpful.
especially if you're familiar with D's
