3600 Instrument Cluster Replace

[Dew3600]

I am replacing the instrument cluster in my 3600 gasser and I had to get the voltage Stabilizer separate. My question is can anyone tell me which wire goes where. The stabilizer has 2 sets of terminals on it one set labeled B and the other labeled I Thanks in advance for any help. (Old stabilizer was not marked.)

 

[JMOR]

(quoted from post at 16:07:27 04/20/13) I am replacing the instrument cluster in my 3600 gasser and I had to get the voltage Stabilizer separate. My question is can anyone tell me which wire goes where. The stabilizer has 2 sets of terminals on it one set labeled B and the other labeled I Thanks in advance for any help. (Old stabilizer was not marked.)

attery & Instruments

 

[Bern]

If you are buying a new cluster with magnetic gauges, the voltage stabilizer is not used.

 

[Dew3600]

How would I be able to tell if I have that kind of gauge? And if I understand right if I do have that kind I don't need a Stabilizer at all?

 

[Bern]

A magnetic gauge usually "floats" when the key is off, whereas a bi-metal gauge always returns to the left when the key is off. A bi-metal gauge moves rather slowly, a magnetic gauge moves very quickly.

With a magnetic gauge cluster, you do NOT use a voltage stabilizer. Also, sending units are NOT compatible between the two styles of gauges.

 

[Dew3600]

Thanks for all the help! now I know why the gas gauge doesn't work either.