4.250 piston

[LN]

Where can you buy a 4.250 piston for a farmall M and any idea abouthow much $

 

[jd b puller]

(quoted from post at 21:15:10 03/08/08) Where can you buy a 4.250 piston for a farmall M and any idea abouthow much $

I can make you new ones of whatever you want. Tell me what you need for CH, Pin dia, dome, valve relief, etc. Around $600
[email protected]

 

[jd b puller]

Sorry, carried the 1 one too many times.. $500 not $600.

 

[Jeff Garst]

Chevy Big Block pistons are 4.25, you can get them with a big dome, You have to lengthen the rods or stroke the crank.

 

[Turbos10]

I bored mine to 4.25 and kept the same stroke with factory rods. I am running a set of flat tops from Murphy's Motor service and paid about $500 for them. They were cut from Aries blanks and are very light weight for such a large piston.

Jeff at Murphys should have the demensions on mine. Email you and I can give you more info on what to tell Jeff so he can pull up the part.

 

[Charles E. McNelly]

Hey Chris,
Ever get that Cummings going in your truck?

 

[54SMTA Puller]

Call me at 660-265-5915

 

[Turbos10]

Yep, It has been up and running several months now. I ended up with a full manual 4L80 behind it. Got it fueled up where it is nice to drive now and I am lovin" it.