4020 diesel

I have a 4020 diesel and it?s hard to set the idle and if you
throttle it up to 1000 rpm it stays there about a minute and
then it it runs up to 1500 / 1800 rpms and then back to idle or
it quits . I went through the pump maybe I missed something
any ideas?
 
I am haveing trouble with return line sealing on top 3 of the injectors it?s a 64 with big injectors the line is clear . I haven?t had the tractor that long maybe the fuel filter is the cause ?
 
I used copper or aluminum washers on a 3010 injector leak off that would not seal with steel washers.
 
Your injector pump needs an overhaul . The plastic Governer weight retainer ring is crumbling and getting INTO the Governer LINKAGE .
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top