4020 hydraulic pump

Does anyone know how to determine if the pump on a 4020 (same as 4010, 3020, etc) is bad or not. I had the pully break that runs the water pump and alternator as well as connects to the pump drive coupler. i don't know what caused the pully to break (it broke out one of the threaded taps where the coupler pins screw into.) When the one threaded taps broke out, the coupler seperated and fell out (more like flew out and put a hole in the radiator). Given it broke out, I'm wondering if the pump could have malfunctioned. Using a 12 inch bar, I can turn the pump. Accordingly, the pump is not locked up, but may have something not working properly. If anyone out there is familar with the pump or the problem i had, i would be greatful. Thanks.
 
My guess was the coupler bushings went bad
and caused it to break. I have seen
several do that. The damper is hard to
pull with the threaded boss broke.
 

very good. thanks. The one bushing was shot and the other one in poor shape. There were still a few threads left, so with a specially built puller, we were able to get the pully off.
 
You can get a new damper thru A and I alot
cheaper than deere. I had the same thing
happen last year on dads 4020.
 

cvphoto59936.jpg

I had to drop the front end to remove pump so I could get a puller in there.
 

Thx. That's some work. We made a little puller to get in the tight space. Wouldn't of been able to do that if all the threads were gone. The upside of making the puller is another tool.
 
I think 4020bw is right.I had the same thing happen to my 4020. I was all over pricing new pumps. I replaced the broken parts ad that was it. still using it.
 
when you hear a knoking sound when running shutting down or starting it is more than likely those bushings shot. If changed they will save your problem. I did the ones in my brothers 2940 as it began to knock. I should look at them again he will never catch it before he has your problem.
 
(quoted from post at 00:51:38 10/20/20) when you hear a knoking sound when running shutting down or starting it is more than likely those bushings shot. If changed they will save your problem. I did the ones in my brothers 2940 as it began to knock. I should look at them again he will never catch it before he has your problem.

Very good - thanks for the help.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top