4020 loadervalve hookup

[Lapuapower]

Im putting a single lever loader valve on my 4020. My question is can i come straight out of the valve itself with quick couplers so that its easy to unhook the hoses when i take the loader off or will it restrict the flow to much. Theres no mounting braket on the loader for a valve and was thinking id mount the valve on the side of my fender because it will be easier for me to reach being vertically challenged

 

[chuck from neb]

Yes that will work just fine

 

[tim s]

Be sure that you have a closed center plug in it, and tighten the pressure relief valve in tight too..