4200 Rollbar canopy

[Zack(NC)]

Hey guys Im still on the lookout for a factory Ford rollbar & white fiberglass canopy for our 4200, to match like the one I have my 5200. Even maybe if someone has one for a 5200 I could take & cut & reweld the bottom plates from a regular 3000/4000 so it would fit the 4000 axle because you can find a salvage rollbar for a 3000/ 4000 a whole lot easier than you can a 4200. Any help on the rollbar or canopy would be appreciated. Zack

 

[souNdguy]

good luck

I hunted for 4-5 ys before I lucked out and found 2 roll bars I needed... still looking for a 3rd...

 

[Ultradog MN]

Hi Zack,
Good to see you on YT.
We just sold the roll bar from a 4600 about a month ago. It was solid but needed sandblasting and paint. No canopy though just the roll bar.
Shipping to NC would probably have killed the deal though.

 

[souNdguy]

looks similar to the one I put on my 4600

 

[Fordfarmer]

There's one (a Simms, which was listed in Ford sales lit. in the '70's) in the picture ads, with a canopy. Seller apparently doesn't know that 4xxx's have a smaller axle than 5/6/7xxx's though... so not sure if it's the size you need.

 

[souNdguy]

after much searching I finally got my 4600 and 5000 rop'ed so am good there...

now I need the smaller rops that will fit the N/00/01 and 000 4 cyl, and 2000/3000 3 cyl. AFAIK, the same rops fits all them axle mounts.

I have a couple loader tractors. actually, my (2) 850s.. one is a tlb the other just a tl I'd love rops on them for safety. I also wouldn't mind a rops on my 950 I mow with.. it's got tallish 14.9-28 tires on it.