4430 planetary 2 speed

I'm working on a John Deere 4430 and I've rebuilt the two speed power shift planetary. The manual shows that once the planetary is assembled, apply minimum 50 psi shop air at the pressure passage and actuate the control valve to check operation of the clutch and brake. If I apply more than 50 psi, say 90 psi air pressure, the clutch and brake actuates fine but i can hear air leaking. Is this normal with the planetary on a bench?
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top