4500 backhoe supply/return

[mhb@ufe]

So if I leave my loader valve in place then item 24 is my pump pressure side and would connect to the supply side on my BH. Item 19 connects to my power beyond from the BH and my sump return would connect to item 20.
I don't want to burn my pump up by making the wrong connections. I appreciate all the help.

Item 22 would be the feed to the loader valve from the backhoe power beyond. Item 19 stays where it is and the return to sump from the backhoe will tie in at item 20.

 

[richardw863]

Item 22 would be the feed to the loader valve from the backhoe power beyond. Item 19 stays where it is and the return to sump from the backhoe will tie in at item 20.

Thanks mhb@ufe that is what I was thinking but had my item number wrong.
Hopefully I can get a steering problem fixed on my 4500 and then get everything connected and working.
It's hard to complain about a $800 tractor that sat for ten years and didn't take much to get it fired up and running.