46 loader

[5020s rock]

hello--will a 46 (not 46a)loader fit a 4020.
it came off a 1520, the guy didnt know.
thanks

 

[buickanddeere]

http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.HomePageServlet_Alt

 

[5020s rock]

hello--came home to no good answers about my question. B AND D,i have the utmost respect for you but thats not an answer. thanks

 

[larryanderson]

This isnt a very good answer but I just removed a nice 46A from a 4020 that needs a new bucket that I am going to sell for $250 or take it to salvage.I would think the 46 would be too short for 4020 and possibly too light

 

[Tx Jim]

IIRC the model 46 was designed for rowcrop tractors not utility tractors. 3010/4010's are shown in photo's of PC # 815 for 46 loader.

 

[buickanddeere]

Sorry, my computer wouldn't open the 46 loader's pdf file from the JD site.
I had hoped your computer would to find the list of which tractor chassis are compatible with which loader mounting frames.

 

[wilamayb]

It will fit but someone must have made some brackets to make it fit a 1520.

The 46 and 46A are really the same loader. The 46A has updates such as a couple frame gussets and larger cylinders. The mounting hardware is exactly the same.

The 46 and 46A loaders were built to fit the 3010-4020 tractor. The axle brackets use different holes depending on which chassis you are using.

 

[thurlow]

Wanted to post that, 'cause it's what I thought, but hated to give advice that I wasn't sure of.

 

[5020s rock]

thanks everyone. it doesnt have that frame extension to fasten to the rear axle. maybe the guy is mistaken and its a 48, then it would fit.

 

[Terry@ky]

Were are you located. I am in western Ky. Is it a hyd bucket.Thanks 270-993-4405

 

[tomstractorsandtoys1]

If it is a 46 loader someone had to do alot of changes to put it on a utility tractor. The cyclinders on a 46 are very light and the frame did not hold up well on a 4010 or 4020. A 46A is a much improved loader. A 48 is also a good choice.