4B JD plow

[Brew74]

Ok well i have posted about this plow before but i have a 4B plow with mp312 moldboards and JD points, now i am having trouble locating any 12 inch boards in my area to replace the ones on my plow that are almost non exsistent. A fellow told me that for plowing purposes i can retofit the plow with highspeed bottoms can anyone tell me what bottoms i may be looking for ? I am not so much concerned with originality as i am availability of parts and useability.
Thanks
Matt

 

[ET]

Any 14" HS or NU bottom will work on that plow. They will cut a 12" furrow fine.

 

[Brew74]

okay well i am feeling pretty stupid as of lately i have been learning something new everyday, and today i learned that my 4B has 2 14 inch bottoms not 2 12's so that makes things a little easier to locate.

 

[BushogPapa]

If we didn't learn something..just ONE thing every day, we would still be in the stone age..!!

Good luck with the change-over..!

Ron.

 

[IHCPloughman]

(quoted from post at 01:50:47 05/13/11) okay well i am feeling pretty stupid as of lately i have been learning something new everyday, and today i learned that my 4B has 2 14 inch bottoms not 2 12's so that makes things a little easier to locate.

MP312 is a 12 inch bottom. Are you measuring something wrong?