Did the john deere 50 ever come equiped from the factory w/ a mag?Mine is early because the narrow front is one part not split as later ones,Thanks anyone.
 
Are you SUREEEEE you're not looking at a WICO DISTRIBUTOR? Read the model number on the side of the unit.

By the way, NO model 50's ever left the factory with magnetos EXCEPT those lined up for export to Mexico.
 
The Wico XB battery powered (NOT a Magneto) coil/distributor ignition had an INTERNAL coil and looked similar to the Wico Model X Magneto...They were designed for 6 volt operation so if used on 12 volts some sort of additional external ballast resistor was necessary.........The XB has an external terminal/stud and if you turn an ignition switch ON voltage is present there........... The X Mag could have an external stud/terminal HOWEVER thats a kill switch which kills the spark IF its wired/switched to frame ground.

If you put a test lamp on the wiring terminal n if when you turn on the ignition switch it lights up ITS AN XB DISTRIBUTOR.....If theres a wire running to a stud terminal on an X Magneto and if it becomes ground when some sort of dash kill switch is switched to OFF, thats the classic Mag kill switch arrangement

The X Mag will SNAP each 180 revolution of the crank/flywheel while the XB Distributor does NOT

As far as using an external coil when converting a mag for use as a battery powered conventional coil ignition,, its easy on a Wico Model C because theres an easy place to attach a coil wire so the mag can still DISTRIBUTE teh spark to teh correct cylinder at the correct time HOWEVER on a Wico X Mag such is NOT the case, it ahs to be jury rigged....

Nuff said???

John T
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top