[email protected]
New User
first time post here,My problem is a 2590 that seems to have excessive blowby, but worse yet would get hot and ran water out from the front of the engine,I would stop while planting and could see a stream of water running from between the block and fan after it had been running for a hour or so, I was baffled as to where the water was actually coming from, after letting it cool it wouldnt do it till it got hot again , there doesnt apear to be any oil in water or water in oil and tractor starts and runs just fine although there does seem to be excessive blowby from the front cylinder, would a bad water pump possibly be the culprit?, am thinking about doing a inframe overhaul , what are your thougts on this? thank you
