530ck spindles

JerryO

New User
I may need to replace the spindles due to someone having attempted to weld them together because of wear. I bought one new knuckle and the splines on it are much better than the old ones so maybe I'll be ok. The concern I have is that my spindles measure much differently than the ones they offer on YT or anywhere else that I have looked. They are 2" in diameter at the bottom bearing and only 9 5/8" tall from the flange to the top of the splines. Do I possibly have an axle from a 580 in mine?

Any help is appreciated!

Jerry
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top