What do you know about the clutch that is in it? If it has what I think IH called a dyna-life clutch with pads instead of a continuous circular fiber lining they are always a little grabby. Definitely not as smooth when you want to move in small precise movements like backing to an implement to hitch up. YT offers what I would call a knock off version of one, see link. They do seem to hold up better to slipping and front end loader service.
https://www.yesterdaystractors.com/Farmall-560_Clutch-Disc_112265.html

This post was edited by used red MN on 07/22/2022 at 10:48 pm.
 
Just suggestion ,does it have correct return spring . International and Farmall take same springs
Does yours have TA ?
Is free pedal set correctly to correct distance, sorry dont have my manual to tell you what it is ,
 
I had to build up the pin and hole on the bottom of peddle on mine. It gets kinda elongated and acts like an eccentric. That might have something to do with it.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top