600b Update

[connor9988]

Have been busy with work and harvest but here are a few pictures of the 600.

Found a splitter valve in my shed of goodies and got to looking at the mounting holes and my torque tube. Had to make some spacers and free the valve up and it moves nicely now. Will also be selling the old gauge cluster as I am using the aluminum insert like my 300 has. I pulled all the wiring and have decided to redo it from scratch.
Finally I needed a little motivation so I set up the tinwork to get a sense of what she will look like in a while. The nose cone needs to be on so I can get my dry element air cleaner (just like my 300) spaced right in the front

 

[chuck machinist]

You should see my check for the gauge cluster in a few days! CM

 

[L.Fure]

Ben,
Do you have contact information for the person that makers the aluminum gauge plate? I'd like to put gauges on my 600B.

 

[connor9988]

Sounds good Chuck, the restored one is safe in its box for you.

 

[connor9988]

Email sent Larry.

 

[mEl]

(quoted from post at 23:47:20 10/12/21) Have been busy with work and harvest but here are a few pictures of the 600.

Found a splitter valve in my shed of goodies and got to looking at the mounting holes and my torque tube. Had to make some spacers and free the valve up and it moves nicely now. Will also be selling the old gauge cluster as I am using the aluminum insert like my 300 has. I pulled all the wiring and have decided to redo it from scratch.
Finally I needed a little motivation so I set up the tinwork to get a sense of what she will look like in a while. The nose cone needs to be on so I can get my dry element air cleaner (just like my 300) spaced right in the front
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto104373.jpg>

<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto104374.jpg>

<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto104375.jpg>

<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto104376.jpg>

<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto104377.jpg>

<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto104378.jpg>

<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto104379.jpg>

<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto104380.jpg>

<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto104381.jpg>

Interesting connor, the engine appears to be the wet sleeve replacement for the original 164, the filter location ahead of the starter is a giveaway.